<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
<channel>
 <title><![CDATA[S7-200模拟量难题]]></title>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334.html]]></link>
 <description><![CDATA[Latest 50 replies of S7-200模拟量难题]]></description>
 <copyright><![CDATA[Copyright(C) 工控人家园]]></copyright>
 <generator><![CDATA[www.ymmfa.com]]></generator>
 <lastBuildDate><![CDATA[Sun, 03 May 2026 03:46:52 +0000]]></lastBuildDate>
  <image>
 <url><![CDATA[images/rss.gif]]></url>
 <title><![CDATA[工控人家园]]></title>
 <link><![CDATA[http://www.ymmfa.com]]></link>
 <description><![CDATA[工控人家园]]></description>
  </image>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[累加求平均值]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#648040.html]]></link>
 <author><![CDATA[xmz6435]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 15 Oct 2009 15:31:26 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[[quote]引用第19楼ngch于2009-10-02 12:45发表的&nbsp;&nbsp;:
我认为：
1，可能是程序还有问题
2，扩展模块排列位置不合理
[/quote]
应该没什么问题吧，我是S7-200 CPU224+EM235CN+EM232*2]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#639123.html]]></link>
 <author><![CDATA[xuxiaoping18]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 02 Oct 2009 10:05:16 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[程序应该没问题吧，事输入端不稳定哦，屏蔽线我也是只接了一端，滤波也设置了，没用的也短接了，想不出来有什么问题[s:28]]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#639122.html]]></link>
 <author><![CDATA[xuxiaoping18]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 02 Oct 2009 10:02:20 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[我认为：
1，可能是程序还有问题
2，扩展模块排列位置不合理]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#639004.html]]></link>
 <author><![CDATA[ngch]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 02 Oct 2009 04:45:15 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[可能还是电流串进去啦
不用的模块短接一下，屏蔽线一端接地，另一端悬空试试看
一般的情况应该是屏蔽线的问题，原来我也遇到过这样问题]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#638147.html]]></link>
 <author><![CDATA[zengfeiqwe]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Wed, 30 Sep 2009 08:16:45 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[硬件接线方式，不用的要短接，软件设置上要设置滤波．]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#636255.html]]></link>
 <author><![CDATA[lwcccf]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Mon, 28 Sep 2009 01:33:24 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[没什么效果，就这样用吧，呵呵]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#636208.html]]></link>
 <author><![CDATA[xuxiaoping18]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Mon, 28 Sep 2009 00:45:23 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[滤波常数或取样数太大反应会迟钝一点，你可以试试，两方面都兼顾一下。]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#635523.html]]></link>
 <author><![CDATA[wjz7211]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Sun, 27 Sep 2009 01:43:29 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[你是说用编程的方法增加他的取样次数吗？加到1000次，可以试试，会不会反应太慢 [s:28]]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#635498.html]]></link>
 <author><![CDATA[xuxiaoping18]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Sun, 27 Sep 2009 01:25:03 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[那样的话你考虑用软件滤波对原来的那一组处理一下。]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#635466.html]]></link>
 <author><![CDATA[wjz7211]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Sun, 27 Sep 2009 01:01:55 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[有查过了，没发现什么问题，现在就是原来的那一组有点不稳定（振幅在100以内），还能凑合着用，虽然不甘心，但也没什么办法了，能试的都试过了，就这样用吧 [s:47] ，谢谢你一直以来的关注！]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#635450.html]]></link>
 <author><![CDATA[xuxiaoping18]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Sun, 27 Sep 2009 00:20:33 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[查一下模块与电位器的地连接是否正确，即要确保电位器、模块输入、输出三者的地是唯一且正确地连接在一起。]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#634592.html]]></link>
 <author><![CDATA[wjz7211]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 25 Sep 2009 15:22:25 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;我是用西门子的模拟量模块，在条件满足的情况下用模块输出一个低电压，在另一个条件满足的情况下电压累加，直到达到电位器（也就是模拟量输入）的电压，然后就用模拟量输入AIW*送到AQW*，另外电压表是接在负载端，但是以前一直都不会变化，变化是在后加了另外三组模拟量 ..]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#633859.html]]></link>
 <author><![CDATA[xuxiaoping18]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 25 Sep 2009 00:20:40 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[是用什么器件对两电压进行切换的？我分析可能是在切换瞬间输出有冲突，造成电压跳变。
另：你所说的整流机的电压表假如是接在整流机输出端的话，那空载和负载时有变化是正常的。]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#633435.html]]></link>
 <author><![CDATA[wjz7211]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 24 Sep 2009 08:53:11 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[[s:28]还碰到一个有趣的现象，在模块的输出保持不变的情况下，（用电脑监控的）并且电位器两端电压不变，整流机的电压表在空载的时候和带负载的时候显示的电压不一样，之间相差了1V多]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#633075.html]]></link>
 <author><![CDATA[xuxiaoping18]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 24 Sep 2009 01:46:43 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[[s:21]我也这么想，干扰应该是不固定的，而我遇到的问题则非常有规律，监控的时候输出的模拟量没有变化，加在电位器两端的电压没有变化，在切换的时候问题就来了，也只能这样解释了，不知道要怎样解决，能否指教一下，我补充一点，总共有四台整流机，其中两台是输出的模拟量越大，电压表显示的电压就越小，而另外两台却相 ..]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#633006.html]]></link>
 <author><![CDATA[xuxiaoping18]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 24 Sep 2009 00:31:58 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[根据你的描述，问题不象是干扰，象是切换电路的问题。]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#632813.html]]></link>
 <author><![CDATA[wjz7211]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Wed, 23 Sep 2009 13:54:10 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[我后来是用EM232输出的10V电压作为他们的电位器电压，监测发现，电压表显示变化前后，输出的模拟量及电位器两端的电压没有变化，而且影响是单向的，第二组会影响第一组，而第一组不会影响第二组，不知什么原因 [s:32]]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#632148.html]]></link>
 <author><![CDATA[xuxiaoping18]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Wed, 23 Sep 2009 00:16:33 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[用程序监控一下，看看干扰的源头在哪，再针对处理。]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#631954.html]]></link>
 <author><![CDATA[wjz7211]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Tue, 22 Sep 2009 13:15:09 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[[s:21] 首先要谢谢你，你是第一个给我答复的人，我用的是屏蔽双绞线，把屏蔽层也接地了，我是在PLC端把他们都连接在一起然后接地，不知道算不算一点接地，接地点也换过，而且发现把接地线连接上那组模拟量也会不稳定，这是不是说明接地线有问题呢？ [s:28] 后来我试着用EM232输出的10V电压作为那些模拟量电位器的电压， [ ..]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#631280.html]]></link>
 <author><![CDATA[xuxiaoping18]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Tue, 22 Sep 2009 00:29:43 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[把连线换成屏蔽线，再检查一下接地，要保证一点接地，实在不行换一下接地点试试。]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#630452.html]]></link>
 <author><![CDATA[wjz7211]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Mon, 21 Sep 2009 01:14:39 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[有没有人帮忙解答一下 [s:39]]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-45334#630406.html]]></link>
 <author><![CDATA[xuxiaoping18]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Mon, 21 Sep 2009 00:13:00 +0000]]></pubdate>
</item>
</channel></rss>