<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
<channel>
 <title><![CDATA[工控之旅又迷茫了]]></title>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265.html]]></link>
 <description><![CDATA[Latest 50 replies of 工控之旅又迷茫了]]></description>
 <copyright><![CDATA[Copyright(C) 工控人家园]]></copyright>
 <generator><![CDATA[www.ymmfa.com]]></generator>
 <lastBuildDate><![CDATA[Sun, 12 Apr 2026 22:06:00 +0000]]></lastBuildDate>
  <image>
 <url><![CDATA[images/rss.gif]]></url>
 <title><![CDATA[工控人家园]]></title>
 <link><![CDATA[http://www.ymmfa.com]]></link>
 <description><![CDATA[工控人家园]]></description>
  </image>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[看了大家的很多建议：有的建议去大厂，有的建议去小厂，但是基本认知一致的是要沉的下心去做，在工作中总结经验，并以此所得提升兴趣，作为你再学习，再热情工作的动力。吃苦，耐劳不是口号，是主观意识的强大，你看到的远不如你自己体验的，每个人的成功都是经过一番寒彻骨锤炼出来的，去伪存真，将不确认的，模糊的加以 ..]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2232161.html]]></link>
 <author><![CDATA[l83438797]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Sun, 24 Oct 2021 10:00:51 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[你才20岁，目前学历是中专。我建议你如果家庭情况允许的话还是回去认真读大学吧！一个中专学历在工控这个行业举步维艰！]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2232085.html]]></link>
 <author><![CDATA[lvpretend]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Sun, 24 Oct 2021 02:12:31 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[刚上班的时候也怕炸，现在自己接的柜子很少测量，都是直接上电，别怕炸。别人接的柜子一定要测量再上电]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2231480.html]]></link>
 <author><![CDATA[mall9002]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 21 Oct 2021 08:13:43 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[[quote]引用第23楼10902502于2021-10-21 09:14发表的&nbsp;&nbsp;:
变频器炸三回？以上是 换了三个变频器是吗？变频器炸一次都算的上是事故了，都要写报告反省检查，还能炸三回，不知道你们咋想的
[/quote]

公司接的线内部线接错了，我去现场也没看哪些，直接上电了，以为公司通过电，第二次叫老师傅来看原因，二次伤害了 ..]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2231349.html]]></link>
 <author><![CDATA[划水人]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 21 Oct 2021 02:46:12 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[变频 器炸了三次，心够大了，要是俺就逃得远远了 [s:28]]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2231316.html]]></link>
 <author><![CDATA[luo76]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 21 Oct 2021 01:28:18 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[变频器炸三回？以上是 换了三个变频器是吗？变频器炸一次都算的上是事故了，都要写报告反省检查，还能炸三回，不知道你们咋想的]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2231307.html]]></link>
 <author><![CDATA[10902502]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 21 Oct 2021 01:14:41 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[以目前的经历来看&nbsp;&nbsp;有去大厂机会更好&nbsp;&nbsp; 如果找不到就去那种有点年限的小公司&nbsp;&nbsp; 起码超过5年&nbsp;&nbsp; 这样里面会有相对较为稳定的业务和工程师&nbsp;&nbsp; 可以学到东西&nbsp;&nbsp;&nbsp;&nbsp;学个2-3年再出来&nbsp;&nbsp; 自己也有底气了。]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2231297.html]]></link>
 <author><![CDATA[cz19880305]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 21 Oct 2021 00:39:18 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[[quote]引用第20楼ddsssscc2198于2021-10-20 12:40发表的&nbsp;&nbsp;:
我觉得 刚毕业出来还是建议去私营小厂，做设备做的杂，学东西是很快的，等手上技术有积累了，然后在去大厂做大型设备再往技术管理去转，有机会可以再去甲方做纯管理型。我就是后悔刚毕业就去了正规的大厂，温水煮青蛙，待了几年，大厂学东西很慢，而 ..]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2231081.html]]></link>
 <author><![CDATA[huanjue]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Wed, 20 Oct 2021 06:39:58 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[我觉得 刚毕业出来还是建议去私营小厂，做设备做的杂，学东西是很快的，等手上技术有积累了，然后在去大厂做大型设备再往技术管理去转，有机会可以再去甲方做纯管理型。我就是后悔刚毕业就去了正规的大厂，温水煮青蛙，待了几年，大厂学东西很慢，而且给你的动手机会很少，都是供应商在做，后来去了私营的小厂，因为人少， ..]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2231050.html]]></link>
 <author><![CDATA[ddsssscc2198]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Wed, 20 Oct 2021 04:40:28 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[见识也是收获。]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2230822.html]]></link>
 <author><![CDATA[windylj168]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Tue, 19 Oct 2021 08:41:21 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[如果你有其他好的出路就不要做这个了&nbsp;&nbsp;这个工资不高 又累]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2230183.html]]></link>
 <author><![CDATA[huangpeng]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Sun, 17 Oct 2021 06:17:46 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[就是出差出的无语了，现在进了大厂做甲方！]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2229972.html]]></link>
 <author><![CDATA[逸风风]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Sat, 16 Oct 2021 03:38:10 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[[quote]引用第15楼gxtmdb82164于2021-10-15 09:39发表的&#160;&#160;:
20岁呀,还是白纸一张~

LZ现在是知道有问题,但是不一定有方向,不知道问题在哪.
作为过来人(好油腻的感觉),给LZ一个建议,不要想着一步登天,老老实实当学徒,重新开始,从看图纸接线开始.一个项目一个项目的完整过完,做完几个项目就好了。

.......
[/quo ..]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2229673.html]]></link>
 <author><![CDATA[划水人]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 15 Oct 2021 01:56:46 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[20岁呀,还是白纸一张~

LZ现在是知道有问题,但是不一定有方向,不知道问题在哪.
作为过来人(好油腻的感觉),给LZ一个建议,不要想着一步登天,老老实实当学徒,重新开始,从看图纸接线开始.一个项目一个项目的完整过完,做完几个项目就好了。

跟你分享一下我的经历,我入行的时候是因为本地找不到本科以下电子研发类的岗位,所以转 ..]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2229664.html]]></link>
 <author><![CDATA[gxtmdb82164]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 15 Oct 2021 01:39:57 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[先进小厂做的杂，涨经验，再在去大厂学规范，镀金。
当然说的小厂不停有非标机练手的小厂，单纯做配电或者简单机的还是赶紧跑路。]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2229657.html]]></link>
 <author><![CDATA[cythyx]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 15 Oct 2021 01:36:25 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[[quote]引用第10楼zhuyongxiong于2021-10-14 19:23发表的&nbsp;&nbsp;:
刚出道除了自己能力要过关，最重要的一点就是：忍。能忍自安，能力是一步一步提上来的，干工作要什么都干，这样你就&#17403;涉及到各方面的东西，技能全面了随手抓来，这样就不至于老看别人脸色，而且还能笼络人脉，你懂得，加油吧骚年
[/quote]

是 ..]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2229619.html]]></link>
 <author><![CDATA[划水人]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 15 Oct 2021 00:34:37 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[[s:21] 感同身受]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2229613.html]]></link>
 <author><![CDATA[15851404012]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 15 Oct 2021 00:23:09 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[好好静静吧，多学点知识没有错，自己技术不够硬，别的就不好说]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2229566.html]]></link>
 <author><![CDATA[payfsl]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 14 Oct 2021 12:59:28 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[刚出道除了自己能力要过关，最重要的一点就是：忍。能忍自安，能力是一步一步提上来的，干工作要什么都干，这样你就&#17403;涉及到各方面的东西，技能全面了随手抓来，这样就不至于老看别人脸色，而且还能笼络人脉，你懂得，加油吧骚年]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2229538.html]]></link>
 <author><![CDATA[zhuyongxiong]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 14 Oct 2021 11:23:26 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[找到大厂（比较依赖自动化设备进行生产的大厂）进去，好好沉淀，技术，工艺，管理等都好好学习，努力往管理上走。这个比在各个小厂里跑强多了，尤其是35岁之后就能体现出来。]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2229528.html]]></link>
 <author><![CDATA[linmaker]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 14 Oct 2021 10:38:19 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[[quote]引用第7楼qj_wgx于2021-10-14 16:48发表的&nbsp;&nbsp;:
能养活自己就好，工控行业混得好的太少，恕我直言，我看你底子不够，行不长久。即便如我，混了几十年，感觉还不如人家数控操作工，薪资不多，压力还大
[/quote]


不说了，又得出差去了，现在年轻多跑跑[s:34]]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2229507.html]]></link>
 <author><![CDATA[划水人]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 14 Oct 2021 09:05:51 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[能养活自己就好，工控行业混得好的太少，恕我直言，我看你底子不够，行不长久。即便如我，混了几十年，感觉还不如人家数控操作工，薪资不多，压力还大]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2229496.html]]></link>
 <author><![CDATA[qj_wgx]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 14 Oct 2021 08:48:18 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[[quote]引用第5楼qj_wgx于2021-10-14 16:22发表的&nbsp;&nbsp;:
大略看了下楼主的经历，楼主水平确实不够，还是安稳一点，去大厂找个稳定工作，哪怕是数控操作工也好。恕我直言，好多工控的公司都不咋地，不正规，加班多，出差多，交五险一金的少，或者按最低水平的交。
[/quote]

进厂思想会退化的]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2229489.html]]></link>
 <author><![CDATA[划水人]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 14 Oct 2021 08:29:34 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[大略看了下楼主的经历，楼主水平确实不够，还是安稳一点，去大厂找个稳定工作，哪怕是数控操作工也好。恕我直言，好多工控的公司都不咋地，不正规，加班多，出差多，交五险一金的少，或者按最低水平的交。]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2229485.html]]></link>
 <author><![CDATA[qj_wgx]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 14 Oct 2021 08:22:38 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[慢慢熬，多做些项目就好了]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2229479.html]]></link>
 <author><![CDATA[李大爷]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 14 Oct 2021 08:08:12 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[Re:Re:去不去收尾，前辈给点建议，很迷茫]]></title>
 <description><![CDATA[[quote]引用第2楼ymmfa于2021-10-14 15:50发表的 Re:去不去收尾，前辈给点建议，很迷茫 :
感谢楼主的分享！
这种情况非常的具有代表性！
我个人的建议是：不去收尾，主要原因是你的能力不够，并且现场情况也很复杂 。
建议去一些民间的培训学校，把电气和自动化方面的东西多培训一下。然后去一些正规点的公司，从机械，到 ..]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2229467.html]]></link>
 <author><![CDATA[划水人]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 14 Oct 2021 07:52:41 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[Re:去不去收尾，前辈给点建议，很迷茫]]></title>
 <description><![CDATA[感谢楼主的分享！这种情况非常的具有代表性！

我个人的建议是：不去收尾，主要原因是你的能力不够，并且现场情况也很复杂，你也不一定能赚到钱，也不一定能帮现场解决问题。

看到 “电柜也是采购接的线”&nbsp;&nbsp;“在现场通电，变频器炸了，一共炸了3次”&nbsp;&nbsp;把我这个卖变频的都吓坏了。

幸好买的不是我家 ..]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2229461.html]]></link>
 <author><![CDATA[ymmfa]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 14 Oct 2021 07:50:05 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[自己顶一下，别沉 [s:39]]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-1717265#2229456.html]]></link>
 <author><![CDATA[划水人]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 14 Oct 2021 07:44:04 +0000]]></pubdate>
</item>
</channel></rss>