<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
<channel>
 <title><![CDATA[“悲惨的事故”！]]></title>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892.html]]></link>
 <description><![CDATA[Latest 50 replies of “悲惨的事故”！]]></description>
 <copyright><![CDATA[Copyright(C) 工控人家园]]></copyright>
 <generator><![CDATA[www.ymmfa.com]]></generator>
 <lastBuildDate><![CDATA[Mon, 18 May 2026 19:03:58 +0000]]></lastBuildDate>
  <image>
 <url><![CDATA[images/rss.gif]]></url>
 <title><![CDATA[工控人家园]]></title>
 <link><![CDATA[http://www.ymmfa.com]]></link>
 <description><![CDATA[工控人家园]]></description>
  </image>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[造成电器设备事故是小事，造成人身伤害事故那就大了！设计时首先要考虑的就是安全问题！吃一堑长一智啊！老兄！]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#281633.html]]></link>
 <author><![CDATA[杨官华]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 08 Aug 2008 03:17:39 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[呵呵！新电柜已经在5月份调试完毕！采用多点分散控制（加装8个100A断路器来进行短路保护）！
电柜空间扩大2.5倍，双开门式！(不好意思，忘记照相了）
谢谢大家的经验分享！ [s:26]]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#276109.html]]></link>
 <author><![CDATA[记得有我]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 31 Jul 2008 15:00:22 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[给设计者好好上一课！可能是第一次设计或者是游击队的或者是半路出家的！]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#276061.html]]></link>
 <author><![CDATA[ljl5130]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 31 Jul 2008 14:17:29 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[电流过大，发热，线老化短路]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#276034.html]]></link>
 <author><![CDATA[dahai900]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 31 Jul 2008 14:05:53 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[你用的交流接触器数量还不少啦]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#263815.html]]></link>
 <author><![CDATA[yangguofans]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Tue, 15 Jul 2008 01:26:34 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[看来这个问题也比较普及啊，就算你在控制多加一个楼电保护开关也会有同样的惨案发生，交流接触器是有触点开关，触头断开的瞬间，都会不同程度产生拉弧、火花，严重的会使主触头灼伤熔化，造成主电路相间的短路，还有可能造成电动机断相运行而损坏电机，在易燃易爆场合，易引起火灾，触头闭合、断开时还伴有较大的噪声等等 ..]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#263813.html]]></link>
 <author><![CDATA[yangguofans]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Tue, 15 Jul 2008 01:25:31 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[好可怕啊，没算好吗]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#263533.html]]></link>
 <author><![CDATA[hzy]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Mon, 14 Jul 2008 13:53:55 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[对各个支路应设与负载相配断路器，且漏电开关是不能控制短路保护的，多学点强电。 [s:21]]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#263463.html]]></link>
 <author><![CDATA[yanzhi2008]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Mon, 14 Jul 2008 12:39:20 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[这就是设计的可靠性问题,有些刚出道的设计者,经验不足,铸成小错(我认为).
有些设计安全性不足,造成工伤,那就才是&quot;悲惨的事故&quot;]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#263448.html]]></link>
 <author><![CDATA[xxxgan]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Mon, 14 Jul 2008 12:23:35 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[保护电路太少了！]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#263373.html]]></link>
 <author><![CDATA[钟昌林]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Mon, 14 Jul 2008 11:03:02 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[太垃圾了~！ [s:28]]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#263339.html]]></link>
 <author><![CDATA[再见理想]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Mon, 14 Jul 2008 10:37:02 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[1,空开太大
2,柜子太小]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#263323.html]]></link>
 <author><![CDATA[cainiao]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Mon, 14 Jul 2008 09:52:51 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[元件也排得太密了]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#263048.html]]></link>
 <author><![CDATA[cyy281]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Mon, 14 Jul 2008 00:00:56 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[[quote]引用第5楼taipi-k于2008-05-21 18:40发表的&nbsp;&nbsp;:
1、安装的器件太多。
2、多加支路断路器
3、整个柜内只有一只空开，接触器太多了，若出现点故障，达不到空开动作电流，不会起到保护作用的。[/quote]
[s:26]]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#262223.html]]></link>
 <author><![CDATA[imfocus]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Sat, 12 Jul 2008 09:13:59 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[整个柜内只有一只空开，接触器太多了，若出现点故障，达不到空开动作电流，不会起到保护作用的
我也觉得这是主要问题]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#255030.html]]></link>
 <author><![CDATA[uiui11]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Tue, 01 Jul 2008 11:20:51 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[电箱里东西装的太紧凑，加上电线太乱，也没有用线槽，半年后才出问题，你太幸运了。 [s:28]&nbsp; [s:28]&nbsp; [s:28]]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#254864.html]]></link>
 <author><![CDATA[caxa-青松]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Tue, 01 Jul 2008 06:48:43 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[加空開,注意散熱.]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#239491.html]]></link>
 <author><![CDATA[uthman]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Tue, 10 Jun 2008 06:01:20 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[真是不辛啊,不过就当是个教训了]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#238709.html]]></link>
 <author><![CDATA[zxf-813]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Mon, 09 Jun 2008 00:05:15 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[每个接触器前加分开关]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#238614.html]]></link>
 <author><![CDATA[xxy811225]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Sun, 08 Jun 2008 14:24:00 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[设计的不太合理，空开用的太少]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#238596.html]]></link>
 <author><![CDATA[buyiwuxi]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Sun, 08 Jun 2008 13:34:42 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[我不得不告诉你，你们的柜子做的不好，不符合标准，既然是大容量的负载，那么你的元件为什么安装的那么密？
也难怪起火，设计的时候没有考虑散热的问题，虽然你自动化技术很好，但是电器设计规则你却没有用上，小容量的负载可以把元件安装密一点，大容量的负载你就没有考虑好。]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#230060.html]]></link>
 <author><![CDATA[chenpingyg]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Sun, 25 May 2008 08:24:29 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[[s:32]]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#229428.html]]></link>
 <author><![CDATA[jemshebei]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Sat, 24 May 2008 05:57:17 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[同情 [s:28]]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#229368.html]]></link>
 <author><![CDATA[工控灿鸟]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Sat, 24 May 2008 03:20:56 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[表示同情，建议你再参阅１２５０Ａ断路器的说明书，它对你后面那么多接触器的过载是保护不了的，另外就是散热方面．
使用人也是有责任的，象这样的事故是可以预防的．]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#229358.html]]></link>
 <author><![CDATA[skysea]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Sat, 24 May 2008 02:42:18 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[从事故现象要学会自己分析思考，如果导线外皮都脱落了，可以断定是断路造成的．既然设备运行半年多，可以说原理是没有问题的，只是在断路器以及其他保护方面考虑有欠缺．]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#229211.html]]></link>
 <author><![CDATA[xxjpc]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 23 May 2008 15:14:03 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[电 柜太小了,易发热, [s:21]]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#229182.html]]></link>
 <author><![CDATA[a888888]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 23 May 2008 14:46:50 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[[s:17]&nbsp; [s:17]&nbsp; [s:17]&nbsp; [s:17]]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#229164.html]]></link>
 <author><![CDATA[nxw417]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 23 May 2008 14:24:00 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[全部的责任都在你方,我敢说你们的电柜一点不达标,如800A电流的话,你电柜内的电线是乱的不得了.线槽都会盖不上的.并且电柜内发热一定是大.]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#229152.html]]></link>
 <author><![CDATA[waxiao88]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 23 May 2008 14:01:49 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[空间设计不合理]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#229117.html]]></link>
 <author><![CDATA[sfyqwm]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 23 May 2008 13:19:20 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[呵呵&nbsp; 这东西我看的多的很呀!!]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-13892#229110.html]]></link>
 <author><![CDATA[a271156864]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 23 May 2008 12:47:39 +0000]]></pubdate>
</item>
</channel></rss>