<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
<channel>
 <title><![CDATA[在可行性的条件下，那个成本最低？]]></title>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-103091.html]]></link>
 <description><![CDATA[Latest 50 replies of 在可行性的条件下，那个成本最低？]]></description>
 <copyright><![CDATA[Copyright(C) 工控人家园]]></copyright>
 <generator><![CDATA[www.ymmfa.com]]></generator>
 <lastBuildDate><![CDATA[Tue, 14 Apr 2026 21:06:24 +0000]]></lastBuildDate>
  <image>
 <url><![CDATA[images/rss.gif]]></url>
 <title><![CDATA[工控人家园]]></title>
 <link><![CDATA[http://www.ymmfa.com]]></link>
 <description><![CDATA[工控人家园]]></description>
  </image>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[可以用电磁铁加连杆机构实现]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-103091#1041415.html]]></link>
 <author><![CDATA[zhoua11]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 13 May 2011 09:26:07 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[电机带动圆盘旋转,在旋盘的一个位制引出一根短臂,此短臂再连动需要移动的机构上就可以了:即使目标物体在圆盘的带动下做往复式运动,不需要制动,不需要PLC,更不要感应器检测,如果不明白,就找点内燃机原理图资料看下,只要看三分钟你就明白]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-103091#1041393.html]]></link>
 <author><![CDATA[张平全]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 13 May 2011 08:53:23 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[用电缸吧，SMC的精度，综全价格最实在！]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-103091#1041246.html]]></link>
 <author><![CDATA[yamqq]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 13 May 2011 06:13:21 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[电机上带个凸轮盘不知道可不可以]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-103091#1039351.html]]></link>
 <author><![CDATA[nhw120]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Wed, 11 May 2011 03:34:41 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[根据机器选购一个步进电机，再去定做个凸轮杆作高速传动行不？]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-103091#1039115.html]]></link>
 <author><![CDATA[ukqbso]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Tue, 10 May 2011 14:33:03 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[如果只要速度可以达到而不用考虑精度的话.可以用机械的方法做到的.就是说普通电机只是一个方向运转.]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-103091#1039073.html]]></link>
 <author><![CDATA[lijinniu]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Tue, 10 May 2011 13:54:24 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[楼主说的不够详细我记得给你说过电机加减速机可以实现但是不知道你是什么详细情况具体型号不好说但是可以告速完全可以实现]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-103091#1037145.html]]></link>
 <author><![CDATA[killking998]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Sun, 08 May 2011 09:44:14 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[机械的成本高，还是用伺服吧，但是用伺服也要丝杆滑轨，除非你用皮带，否则伺服机械成本也不低]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-103091#1035448.html]]></link>
 <author><![CDATA[seseqq]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Fri, 06 May 2011 08:53:39 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[还有用伺服电机成本也不一定高,而且可靠性高!!]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-103091#1021903.html]]></link>
 <author><![CDATA[lu831226]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 21 Apr 2011 05:52:47 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[可以用两个电机一个控制正转一个控制反转,切换用电磁离合器来进行!!]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-103091#1021901.html]]></link>
 <author><![CDATA[lu831226]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 21 Apr 2011 05:51:45 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[有高手说过 用电磁离合器&nbsp;&nbsp; 可行？？不清楚这个设备]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-103091#1021745.html]]></link>
 <author><![CDATA[薰衣草018]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 21 Apr 2011 02:21:20 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[[quote]引用第2楼薰衣草018于2011-04-21 09:52发表的&nbsp;&nbsp;:
用电机是最便宜&nbsp;&nbsp;使用机械方案改变往复运动这个机械设计比较有难度&nbsp;&nbsp;配合接近开关 控制 离合 求方案 @——@
[/quote]
应该是最省钱的,但就是不知道电机能不能这么频繁切换方向1-2秒就要切换!要考虑的....
有大虾这样切换着用吗?学习下]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-103091#1021725.html]]></link>
 <author><![CDATA[zhangjincan]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 21 Apr 2011 02:00:40 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[如果你的系统位置相对固定的话，这样的速度建议使用气动（气缸做往返运动）。
无杆气缸是否可以实现，这个无杆气缸是不是还需要提供一个外接气源？
那当然需要一个比较洁净的气源了。]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-103091#1021715.html]]></link>
 <author><![CDATA[wwcwwc]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 21 Apr 2011 01:52:49 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[用电机是最便宜&nbsp;&nbsp;使用机械方案改变往复运动这个机械设计比较有难度&nbsp;&nbsp;配合接近开关 控制 离合 求方案 @——@]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-103091#1021714.html]]></link>
 <author><![CDATA[薰衣草018]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 21 Apr 2011 01:52:28 +0000]]></pubdate>
</item>
<item>
 <title><![CDATA[]]></title>
 <description><![CDATA[[quote]引用楼主薰衣草018于2011-04-21 09:25发表的 在可行性的条件下，那个成本最低？ :
动力需求带动水平物体1公斤左右，以每秒一米多的速度来回一米的距离，

1.使用步进机&nbsp;&nbsp; 步进控制器 步进驱动器&nbsp;&nbsp; 接近开关 （问题出现在[color=#FF0000]步进机不能达到这个传速速度[/color]）
2.交流电机&nbsp ..]]></description>
 <link><![CDATA[http://www.ymmfa.com/read-gktid-103091#1021707.html]]></link>
 <author><![CDATA[zhangjincan]]></author>
 <category><![CDATA[综合讨论]]></category>
 <pubdate><![CDATA[Thu, 21 Apr 2011 01:45:44 +0000]]></pubdate>
</item>
</channel></rss>