• «
  • 1
  • 2
  • 3
  • »
  • Pages: 1/3     Go
liu2004
级别: *
精华主题: * 篇
发帖数量: * 个
工控威望: * 点
下载积分: * 分
在线时间: (小时)
注册时间: *
最后登录: *
查看liu2004的 主题 / 回贴
楼主  发表于: 2011-05-04 20:42
要的请留邮箱,太大。
                  


Motion Controller Peripheral Software Package
SW6RNC-GSVHELPE
-------------------------------------------------------------------------


Thank you for purchasing this software.
You should carefully read the following terms and conditions
before using this software. And that you can refer the manuals
of WindowsNT/98/2000/XP to resolve the basic operation of
Windows NT/98/2000/XP.

1. Operating requirements

  (a) Hardware requirements
    ?  100% WindowsNT/98/2000/XP compatible PC/AT
            (not support multi-processor)
    ?   CPU :
                Windows NT/98 : Pentium 133-MHz or more recommended
                Windows 2000  : Pentium II 233-MHz or more recommended
                Windows XP    : Pentium II 450-MHz or more recommended
                 (Pentium II 233-MHz or more for Windows 2000)
    ?   Memory : It depends on the OS environment.
                Windows NT/98 : 32 MB or more recommended.
                Windows 2000  : 64 MB or more recommended.
                Windows XP    : 192 MB or more recommended.
    ?   Free disk: 68 MB or more
    ?   Monitor resolution: SVGA(800*600/256 Colors) or more


  (b) OS requirements
    ?   Windows NT Workstation Ver. 4.0(Service Pack2 or later)
    ?   Windows 98
        ?   Windows 2000
        ?   Windows XP Professional
        ?   Windows XP Home Edition

        * The following Windows version is not supported.
            ? Windows NT 3.5 Workstation
        ? Windows NT 3.51 Workstation
            ? Windows NT Server
            ? Windows 95
        * In Windows NT 4.0,the use needs Microsoft Internet Explorer 3.01
          or higher.

2. Installation method

  First, close any others applications running on Windows NT/98/2000/XP.

  From [Start] select [Run...],input "X:setup.exe"(X: CD-ROM Drive)
or click [Browse] and select "Setup.exe" from the CD-ROM drive.
  After starting the installor , follow the instructions of the installor.

3. Notice

(1) When you install this software to a drive which is compressed by
DriveSpace or other tools, if it freezes in installation, please increase
the free space of the drive or select other drive which is not compressed
to install this software.

(2) If you want to change the installation destination or reinstall it,
please uninstall it before installing it again.

(3) Depending on the system font size of Windows NT/98/2000/XP, sometimes
the screen may not be displayed properly, please use a small size font.



-------------------------------------------------------------------------------------

Microsoft and MS-DOS, Windows, Windows NT are registered trademarks of
Microsoft Corporation in the United States and other countries.

Copyright(c) 2001 MITSUBISHI ELECTRIC CORPORATION All Rights Reserved.
zhang850412
有可以拔13570997576 张工
级别: 工控侠客
精华主题: 0
发帖数量: 256 个
工控威望: 2209 点
下载积分: 13861 分
在线时间: 1078(小时)
注册时间: 2009-07-19
最后登录: 2024-02-29
查看zhang850412的 主题 / 回贴
1楼  发表于: 2011-05-04 22:35
谢谢楼主…172492590@qq.com
zyfzxh
级别: 论坛版主

精华主题: 12 篇
发帖数量: 6490 个
工控威望: 7498 点
下载积分: 108061 分
在线时间: 4829(小时)
注册时间: 2006-08-10
最后登录: 2024-05-31
查看zyfzxh的 主题 / 回贴
2楼  发表于: 2011-05-05 07:54
http://down.ymmfa.com/?id=24
這裡就有,
請說明樓主的版本?
aaaa0595
级别: 略有小成
精华主题: 1 篇
发帖数量: 247 个
工控威望: 304 点
下载积分: 437 分
在线时间: 77(小时)
注册时间: 2007-07-01
最后登录: 2024-01-06
查看aaaa0595的 主题 / 回贴
3楼  发表于: 2011-05-06 11:47
广东工程
级别: *
精华主题: * 篇
发帖数量: * 个
工控威望: * 点
下载积分: * 分
在线时间: (小时)
注册时间: *
最后登录: *
查看广东工程的 主题 / 回贴
4楼  发表于: 2011-05-06 13:21
谢谢了,楼主
song2007
song2007
级别: 略有小成
精华主题: 0
发帖数量: 109 个
工控威望: 256 点
下载积分: 498 分
在线时间: 299(小时)
注册时间: 2007-10-31
最后登录: 2024-05-11
查看song2007的 主题 / 回贴
5楼  发表于: 2011-05-08 16:47
songnr925@163.com
谢谢楼主的无私贡献。
sxy
级别: 略有小成
精华主题: 0
发帖数量: 67 个
工控威望: 235 点
下载积分: 484 分
在线时间: 90(小时)
注册时间: 2008-12-25
最后登录: 2022-12-25
查看sxy的 主题 / 回贴
6楼  发表于: 2011-05-09 02:25
你有没有 运动CPU  程式呢  发来研究下
good
级别: 略有小成
精华主题: 0
发帖数量: 274 个
工控威望: 489 点
下载积分: 788 分
在线时间: 46(小时)
注册时间: 2008-04-11
最后登录: 2022-12-10
查看good的 主题 / 回贴
7楼  发表于: 2011-05-09 21:56
能发一份给我吗?我的是137612619@qq.com       在此谢过了
lzdcy321
级别: 略有小成
精华主题: 0
发帖数量: 121 个
工控威望: 201 点
下载积分: 682 分
在线时间: 46(小时)
注册时间: 2010-07-16
最后登录: 2023-04-15
查看lzdcy321的 主题 / 回贴
8楼  发表于: 2011-05-09 23:05
谢谢了,楼主!!!!!!!!!
leozhaott
级别: 探索解密
精华主题: 0
发帖数量: 28 个
工控威望: 146 点
下载积分: 610 分
在线时间: 11(小时)
注册时间: 2011-06-20
最后登录: 2012-08-08
查看leozhaott的 主题 / 回贴
9楼  发表于: 2011-06-21 21:51
我想要SW8RNC-GSVHELPE  用于三菱Q173DCPU的  找了好久都没找着呢!希望有的能发一个给我!
leozhaott
级别: 探索解密
精华主题: 0
发帖数量: 28 个
工控威望: 146 点
下载积分: 610 分
在线时间: 11(小时)
注册时间: 2011-06-20
最后登录: 2012-08-08
查看leozhaott的 主题 / 回贴
10楼  发表于: 2011-06-21 21:53
刚刚忘了邮箱了   邮箱:673721892@qq.com
顾仁仁
级别: 略有小成
精华主题: 0
发帖数量: 332 个
工控威望: 333 点
下载积分: 512 分
在线时间: 193(小时)
注册时间: 2007-10-28
最后登录: 2024-05-31
查看顾仁仁的 主题 / 回贴
11楼  发表于: 2011-07-10 11:02
谢谢楼主…  jxgfguren@.163.com
  • «
  • 1
  • 2
  • 3
  • »
  • Pages: 1/3     Go